Go to homepage
€0.00*
Pinion Ölservice - Set
Pinion oil service set  
Complete set consisting of 60 ml gear oil, oil syringe, hose, screw connector for a clean oil change on the Pinion gearbox.

€34.00*
Item number: E8117200243
Details
Schaltungstaster EP8
Switching button EP8  
without cable for Shimano Gen. 2 cable Programmed as shift button: up --- rear upshift down --- downshift rear Suitable for Husk-e with EP8 motor.

€148.70*
Item number: E8117200347
Details
Kabel für DI2, 2nd Gen. 800mm
Cable for DI2, 2nd Gen. 800mm  
suitable for Shimano EP8 drivetrain systems

€43.20*
Item number: E8117200351
Details
Schalthebel XT 11-fach
Shift lever XT 11-speed  
Clamp mounting on the right handle

€93.30*
Item number: E8117200222
Details
Schaltungstaster EP6 Gen. 2
EP6 Gen. 2 switch  
for Shimano Gen. 2 battery management suitable for installation on Husk-e with EP6 motor, center button to switch between automatic/manual without cable

€81.60*
Item number: E8117200425
Details
11-Fach Schaltwerk DEORE XT DI2
11-speed rear derailleur DEORE XT DI2  
Gear steps: 11-speed Capacity: 35 teeth Compatibility: Shimano MTB 11-speed

€710.20*
Item number: E8110200201
Details
20" Antriebsrad Nexus 8-Gang Di2
20" Nexus 8-speed Di2 drive wheel  36 holes
20" drive wheel with Nexus 8-speed Di2 gears. With integrated coaster brake and 5-hole disc brake mount. Only in combination with Shimano E6110 motor.

€509.90*
Item number: E8117200005
Details
Schaltzughüllenschutz mit Spiralfeder
Protection for shift cable housing  and Flexpipe
Z 7100 200 147

€30.00*
Item number: E8100200147
Details
Pinion Schaltzüge
Pinion shift cables  
consisting of: - 4 pcs. inner shift cable 1.2mm - 2 pcs. outer cable housing, longitudinally reinforced 1500mm - 2 pcs. spiral-reinforced outer cable housing 1200mm - 4 pcs. end caps 4mm - Cable ties. 4 pcs.3,5x150 mm - Cable ties. 2 pcs.2,5x98 mm The spiral-reinforced cable grommet can be used at the top and the longitudinally reinforced cable grommet at the bottom. This reduces the necessary shifting force while maintaining stability in the required range.

€24.60*
Item number: E8117200242
Details
Shimano Motoreinheit Di2 8 Gang
Shimano Di2 8-speed motor unit  
For NEXUS / ALFINE Di2 gear hubs

€179.10*
Item number: E8100200188
Details
Kassette Cues 10-fach 11-43 Zähne
Cassette Cues 10-speed 11-43 teeth  
Linkglide technology

€69.00*
Item number: E8117200421
Details
Kette Link-Glide 104 Glieder
Link-Glide chain, 104 links  
Suitable for 10/11-speed LINKGLIDE and 11-speed HYPERGLIDE systems

€30.20*
Item number: E8117200395
Details
Schalthebel Deore 11-fach
Shift lever Deore 11-speed  
Clamp mounting on the right handle Rapidfire Plus operation

€45.50*
Item number: E8100200359
Details
Kabel für DI2, 2nd Gen. 950mm
Cable for DI2, 2nd Gen. 950mm  
suitable for Shimano EP8 drivetrain systems

€53.30*
Item number: E8117200388
Details
Kette HG53 116 Glieder
Chain HG53 116 links  
for the primary drive on the Husk-e. The chain length always depends on the position of the bottom bracket and the number of teeth on the chainring. It may be necessary to shorten the chain by a few links. Chain from the bottom bracket to the motor / Pinion gearbox. Incl. a chain rivet pin to connect the chain.

€36.80*
Item number: E8117200000
Details
Schaltwerk XT 11-fach mech.
XT 11-speed mechanical rear derailleur  
Technik: Top Normal Schaltstufen hinten: 11-fach Empf. Kette: HG-X 11-fach Gesamtkapazität: 39 Zähne Max. Differenz vorne: 10 Zähne Max. größtes Ritzel: 40 Zähne/42 Zähne nur für 1x11 Min. größtes Ritzel: 40 Zähne Max. kleinstes Ritzel: 11 Zähne Min. kleinstes Ritzel: 11 Zähne Einsatzbereich: MTB

€152.70*
Item number: E8117200213
Details
Kabel für DI2 250mm lang
Cable for DI2 250mm long  
Cable for Shimano DI2

€30.40*
Item number: E8100200330
Details
Kabel für DI2, 2nd Gen. 200mm
Cable für DI2, 2nd Gen. 200mm  
suitable for Shimano EP8 drive systems

€40.60*
Item number: E8117200353
Details
Kette HG53 106 Glieder
Chain HG53 110 links  
for the secondary drive on the Husk-e. Chain may only be used for hub gears and the Pinion gearbox. NOT suitable for derailleur gears. The chain length is designed for use with a chain tensioner. If no chain tensioner is used, the chain must be shortened by 20 links. Chain from the motor / Pinion gearbox to the gear hub / sprocket of the bike. Incl. a chain rivet pin to connect the chain.

€33.20*
Item number: E8117200001
Details
Adapter DI2 Kabel 1st. Gen. auf 2nd Gen.
Adapter DI2 cable 1st. Gen. to 2nd Gen.  
for connecting first generation DI2 cables (Ø4.9mm connector) with second generation cables (Ø3.4mm connector). Required for connecting older components with the EP8 system.

€34.50*
Item number: E8117200349
Details
20" Antriebsrad Nexus 5-Gang Di2
20" Drive wheel Nexus 5-speed Di2  32 holes
20" drive wheel with Nexus 5-speed Di2 gears.

€450.20*
Item number: E8117200007
Details
Kabel für DI2 550mm lang
Cable for DI2 550mm long  
Cable for Shimano DI2

€39.10*
Item number: E8100200331
Details
Shimano Motoreinheit Di2 5 Gang
Shimano Di2 5-speed motor unit  for EP6 / EP801
für die Nexus 5-Gang Nabe ermöglicht das elektrische Schalten inkl. Automatikfunktion

€128.80*
Item number: E8117200431
Details
Ritzel 20 Zähne für Nabenschaltung
Sprocket 20 teeth for hub gears  
suitable for Nexus and Alfine hubs.

€7.80*
Item number: E8100200120
Details
This website uses cookies to ensure the best experience possible. More information...