Go to homepage
€0.00*
Bremsscheibe 203mm Tektro 6-Loch
Brake disc 203 mm Tektro 6-hole  
Thickness: 2.3 mm NOT suitable as a replacement for 1.8 mm thick discs.

€20.40*
Item number: E8105300002
Details
Tetra-Schalengriffe
Tetra shell handles, retrofit kit  
consisting of: Handle shell (1100600013) with holder (1100600015) right and left 2x pan-head screw M8x35 2x toothed disc M8 2x washer M8 Item E8100600065 is also required for retrofitting.

€224.00*
Item number: E8110601100
Details
Querlenker oben rechts
Upper right control arm  
with joint heads made of tempered steel, already adjusted to length and angle

€160.70*
Item number: E8105400010
Details
Fidlock Bike Base
Fidlock Bike Base  black
includes mounting adapter for head tube and mounting hardware

€19.90*
Item number: E8105900767
Details
Bafang Rohloff Verbindungskabel
Bafang Rohloff connection cablel  Hub, power and gear sensor
Connection from the Rohloff hub to the power supply and to the gear sensor (on the motor side)

€15.10*
Item number: E8105200030
Details
Leitungsklammer Querlenker oben
Upper wishbone pipe clamp  
For securing the brake pipe in the upper wishbone

€2.30*
Item number: E8105400071
Details
Gummipuffer für Sitzplatten-Auflage
Rubber buffer for seat plate support  
Ø25mm Height 25mm M6x10 Medium strength Three pieces are required for a complete replacement of the buffers.

€5.90*
Item number: E8105400050
Details
Passschraube 50 mm
50 mm fittig screw  
for mounting the front shock absorber on the lower control arm

€21.00*
Item number: E8105000050
Details
Tretlagerwelle 276mm mit Zahnkranzstern
Bottom bracket shaft 276mm  with sprocket star
Handle width 50cm with standard crank Handle width 58cm with Tetra pedal crank Scope of delivery: Bottom bracket shaft with spider, spacers, ball bearings and nuts aluminium M20x1.5mm

€290.50*
Item number: E8117500003
Details
Passschraube 20 mm
20 mm fittig screw  with cylinder head
for mounting the wishbones on the connecting tunnel

€14.40*
Item number: E8105000020
Details
Daumengas Verlängerungskabel
Thumb throttle extension cable  
with 1870 mm cable length, 3-pin

€15.50*
Item number: E8105200011
Details
Sitzkissen unten mit festem Keil
Seat cushion with fixed wedge  
consisting of two-piece foam padding and seat cushion cover made of Cordura fabric Width: 31 cm Length: 41 cm Height: 5 cm

€176.00*
Item number: E8105800115
Details
Beinstütze Größe M
Leg support size M  black
Insertion tubes may need to be shortened.

€133.20*
Item number: E8105400058
Details
Steckschlüssel mit 19mm
19 mm Socket wrench  
for tightening and loosening the screw axles for the 24" front wheels

€21.90*
Item number: E8105000100
Details
Handgriff Standard
Standard handle  
for RapidFire Complete handle incl. handle cover, pivot axle and fastening material Not suitable for attaching hand supports.

€114.10*
Item number: E8110600018
Details
Antriebsrad 27,5" hinten mit
27.5" rear drive wheel  with freewheel hub
27.5" Truck 35 rim with PA lettering 11-speed Shimano freewheel hub 148 mm installation width (ETRTO 584) Color: black

€212.20*
Item number: E8105100001
Details
Frontscheinwerfer LUMOTEC DC 12V
LUMOTEC DC 12V front headlight  powered by the drive system,
including mounting hardware. The headlight cable must be cut to length and soldered to the light cable from the drive system. Black wire = – Black/white wire = +

€113.50*
Item number: E8105900662
Details
Tetra-Handstütze
Tetra handrest  
pivotable and adjustable grip width incl. mounting material Version without handle For retrofitting, article E8100600065 is also required.

€104.20*
Item number: E8110600020
Details
Passschraube 30 mm
30 mm fitting screw  
for mounting the dampers at the front top and rear of the carriage and for mounting the damper carriage at the rear between the motor mounting plates

€16.50*
Item number: E8105000030
Details
Tretkurbel Tetra 155 mm
Pedal crank Tetra 155 mm  
with flared crank arm for maximum upper body clearance Incl. square mount and bearing. Compatible with rotating axle handle. Crank length 155 mm

€183.80*
Item number: E8100600105
Details
15mm Steckachse
15mm thru axle  122mm locking length

€117.40*
Item number: E8000200956
Details
Kettenblatt Bafang 32 Zähne
Bafang chainring, 32 teeth  
Includes spider for the Bafang motor

€50.90*
Item number: E8105200007
Details
Schraubachse 15 mm
Screw axle 15 mm for front wheels  
must be tightened to 30 Nm

€24.80*
Item number: E8105400013
Details
Halterohr verstärkt [240 mm]
Reinforced mounting tube [240 mm]  Size M
Includes glued-in reinforcement studs

€44.80*
Item number: E8105500010
Details
This website uses cookies to ensure the best experience possible. More information...