consisting of:
Handle shell (1100600013) with holder (1100600015)
right and left
2x pan-head screw M8x35
2x toothed disc M8
2x washer M8
Item E8100600065 is also required for retrofitting.
Battery for Shimano DI2 shifting systems
*****Dangerous materials notice: UN 3480, lithium-ion batteries, 9, (E); Packaging: 4G box, cardboard; Quantity per transport category: 1 kg = 4 points (value) *****
When converting to the stick battery, the following additional parts are required:
- Charger for stick battery Di2
- stick battery Di2 battery holder
For mounting one derailleur dropout.
Includes:
1x Grooved Nut for Derailleur dropout
1x Washer for Derailleur dropout
1x Set of Screws for Derailleur
Note: Two kits are required to mount both derailleur dropouts
For mounting a dropout of the hub gear variant.
Consists of:
1x Grooved nut for dropout
1x U-washer for dropout
1x Screw set for hub gear
Note: Two kits are required to mount both dropouts
for converting the primary gear ratio.
Chainring 28 teeth for the bottom bracket shaft.
Converting the chainring to 28 teeth from
22 teeth increases the top speed by approx. 28%.
However, it also reduces the response behaviour of the
power assistance by 28%, or requires 28% more pedalling
pedalling force to get the same support.
LK - Ø: 64mm, square
for installation on the bottom bracket shaft of the Husk-e.
Set with chainring mounting bolts, spacers
and chain HG53, 1,7m incl. 2 pcs. chain rivet pins.
---- Please note:
To install the chain and adjust the exact chain length chain length, a chain riveting tool and the necessary expertise in bicycle technology is required!