Z 7100 200 147

consisting of: - 4 pcs. inner shift cable 1.2mm - 2 shift cable clamps for mounting in the twist shifter - 2 pcs. outer cable housing, longitudinally reinforced 1500mm - 2 pcs. spiral-reinforced outer cable housing 1200mm - 4 pcs. end caps 4mm - Cable ties. 4 pcs.3,5x150 mm - Cable ties. 2 pcs.2,5x98 mm The spiral-reinforced cable grommet can be used at the top and the longitudinally reinforced cable grommet at the bottom. This reduces the necessary shifting force while maintaining stability in the required range.

for the secondary drive on the Husk-e. Chain may only be used for hub gears and the Pinion gearbox. NOT suitable for derailleur gears. The chain length is designed for use with a chain tensioner. If no chain tensioner is used, the chain must be shortened by 20 links. Chain from the motor / Pinion gearbox to the gear hub / sprocket of the bike. Incl. a chain rivet pin to connect the chain.

Complete set consisting of 60 ml gear oil, oil syringe, hose, screw connector for a clean oil change on the Pinion gearbox.

for the primary drive on the Husk-e. The chain length always depends on the position of the bottom bracket and the number of teeth on the chainring. It may be necessary to shorten the chain by a few links. Chain from the bottom bracket to the motor / Pinion gearbox. Incl. a chain rivet pin to connect the chain.